[KLUG Members] routing question
Russell Yonkers
members@kalamazoolinux.org
Mon, 17 Dec 2001 07:50:35 -0800 (PST)
What is Zebra and what does it do??
Also I see the static route to 0.0.0.0 for I think it
is called a gateway of last resort? Will this work
with RIP2? Will the Linux box work with RIP2?
Reason I am asing about RIP2 is that we do not get
into OSPF in the class (only teaching to a CCNA
level).
--- Adam Williams <awilliam@whitemice.org> wrote:
> >I am running RedHat 7.1 on a firewall server and
> using
> >masqurading between the Internet and the internal
> >network (a computer lab). It is working fine to
> the
> >main network in the lab. The lab is broken into
> >multiple subnets through cisco routers. I have
> been
> >able to get the Internet access to the other
> subnets
> >using Squid. I cannot get the routing so that the
> >other subnets can get out to the Internet though.
> I
> >think I need to use gated so that the Linux box
> will
> >talk with the Cisco routers but am not sure. Any
> >ideas??
>
> Assumption: Your internal subnets are privately
> numbered, as in
> 192.168.x.x or 10.x.x.x or whatever that other one
> is.
>
> Assumption: You are using OSPF for a routing
> protocol and not some
> diseased proprietary protocol.
>
> Log into a Cisco router and add
>
> ip route 0.0.0.0 0.0.0.0 {firewall ip}
>
> to the global config and
>
> redistribute static metric {some appropriate value,
> say 3}
>
> to the router ospf stanza.
>
> Now all the routers know where the default gateway
> is.
>
> Install "zebra" on the firewall, I think it comes
> with RH7.x
>
> Define the hostname in /etc/zebra.conf
>
> hostname monkeybutloving-thesequal
>
> Define your OSPF params in /etc/ospfd.conf
>
> hostname monkeybutloving-thesequal
> router ospf
> network {your network}/{your mask} area {your area,
> probably 0}
>
> Start the routing daemons
>
> /etc/rc.d/init.d/zebra start
> /etc/rc.d/init.d/ospfd start
>
> You probably want to use chkconfig to make them
> start every time.
>
> Be careful with logging information from zebra, it
> can make ALOT.
>
> I suppose you could publish the default route into
> OSPF from the firewalls
> ospfd but I prefer to let routers handle routing,
> and let hosts recieve
> routing information but not publish it. It's just
> an intellectual hangup
> I have; specialization, division of labor, all
> that...
>
> --
>
-----------------------------------------------------------
> Ximian GNOME, Evolution, LTSP, and RedHat Linux +
> LVM & XFS
>
-----------------------------------------------------------
>
> _______________________________________________
> Members mailing list
> Members@kalamazoolinux.org
>
__________________________________________________
Do You Yahoo!?
Check out Yahoo! Shopping and Yahoo! Auctions for all of
your unique holiday gifts! Buy at http://shopping.yahoo.com
or bid at http://auctions.yahoo.com