[KLUG Members] Networking with Windows SOLVED

[Andy]

Thanks for all the help Adam. I finally figured out my
problem.. I forgot to place the "options routers
192.168.1.1; " in my DHCPD.conf so I was not getting
an actual on workstation. Thanks for all the help.
--- adam@morrison-ind.com wrote:
> >I was using the IP number
> >Ping 192.168.1.100
> 
> Abd you just got nothing in response, or a request
> timed out, etc...
> 
> >Now the one thing I am not familiar with is if you
> >have multiple NICs in a machine do you have to
> specify
> >what one you are using like you do when you start 
> >DHCPD should I be doing Ping Eth1 192.168.1.100??
> 
> No, IP routing takes care of all that.  You can
> check your routing table with
> "netstat -rn".  DHCP needs the specification because
> it operates below IP, as
> the clients don't have IPs yet.
> 
> >sorry for seeming stupid it has been almost 2 years
> >since I have worked with Linux and then it was just
> in
> >a workstation setting. 
> 
> You should go take a look at
> ftp://kalamazoolinux.org/pub/pdf/TCPIP.pdf
> _______________________________________________
> Members mailing list
> Members@kalamazoolinux.org
>



__________________________________________________
Do you Yahoo!?
Y! Web Hosting - Let the expert host your web site
http://webhosting.yahoo.com/