[KLUG Members] My own SCSI question
Nikolas Reist
members@kalamazoolinux.org
Mon, 02 Jun 2003 15:42:36 -0400
Adam Williams wrote:
>>I have 5 2 g.b. Seagate SCSI 68 pin drives. I have a differential
>>controller and the drives all spin up but the card doesn't detect them.
>
>
> Right, you can't use SE devices with a DIFy controller.
>
Know where I could get a SE adapter (pref used)?
>
>>Well Seagate says these particular drives are only meant for single
>>ended SCSI bus. Plus I don't think I have all the jumpers set right
>>either. All of them except one are set to termpower while the last is
>>only set to termenabled. I am just wondering if my configs are correct
>>at all so when I get my hands on a single-ended SCSI adapter I can get
>>them working. Any info about this would be excellent.
>
>
> Your setting sound correct.
>
> 1. Every drive has a unique ID, with none set as 7
> 2. Term power is enabled on at least one devices
> 3. Termination is enabled on last device OR you have a terminator on the
> end of the cable.
Only have one jumper per drive so will it matter if I don't have term
power on one of the drives? And does termpower have to be enabled on
the termenabled drive?
They all have unique id's none them 7.
>
> _______________________________________________
> Members mailing list
> Members@kalamazoolinux.org
>
>