[KLUG Members] SuSe 9.1 Linux Software RAID
Phillip Hofmeister
plhofmei at antiochcomputerconsulting.com
Thu Jul 8 21:15:48 EDT 2004
On Thu, 08 Jul 2004 at 08:32:52PM -0400, Doc Rea wrote:
> Hey all:
>
> Has anyone got the Linux Software RAID to work on SuSe 9.1? The 2.6
> kernel no longer supports my Promise Fastrack configuration (SuSe even
> makes a point to remind me of it in message boxes throuhgout the install).
>
> I'm not looking at anything fancy (RAID0 or RAID1 is fine).
>
> I'm running 4 80GB IDE drives on the machine.
>
> Any tips? I've been through a couple of config attempts and no luck so far.
I have setup software raid with 2.4. I believe this are plenty of
step-by-steps out there on this topic. Check google or tldp.org.
If you have any specific questions I will help out the best I can.
With 4 drives I would suggest RAID 5 or 0+1. Depending on the processor
specs RAID 5 may create a significant amount of CPU overhead. I would
avoid RAID 1 (Striping) since the failure of one drive would result in
the loss of your entire set. I would also put all 4 drives on a
different channel if possible to maximize throughput (we are talking
IDE...aren't we?)
--
Phillip Hofmeister
PGP/GPG Key:
http://www.zionlth.org/~plhofmei/
wget -O - http://www.zionlth.org/~plhofmei/key.asc | gpg --import
More information about the Members
mailing list