[KLUG Members] no route to local network?
Adam Tauno Williams
awilliam at whitemice.org
Thu May 5 22:18:25 EDT 2005
> I'm trying to set up an old 500mhz box as a cable modem gateway running
> Suse 9.2. It gets a DHCP address just fine from the cable modem, but
> doesn't work on the internal LAN. It seemed to work fine internally
So you have two NICs?
> until I gave it a static IP, then it completely chokes. It can ping
> itself by IP address, but reports "no route to host" when i try to ping
> anything else, even an adjacent IP. This occurs even when I disable the
> outside NIC. Anybody have a clue what could cause this? Here's the
> routing table, which looks fine to me. What am I missing?
> Destination gateway mask
> flags interface
> 192.168.41.0 * 255.255.255.0 U eth0
> link-local * 255.255.0.0 eth0
> loopback * 0.0.0.0 U eth0
> default * 0.0.0.0 UG eth0
Where is a reference to eth1? The first line looks like it might be the
route to the LAN, is the LAN hooked into eth0? You're certain the your
firewall isn't blocking ICMP?
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 189 bytes
Desc: This is a digitally signed message part
Url : http://www.kalamazoolinux.org/pipermail/members/attachments/20050505/60aec4f6/attachment.bin
More information about the Members
mailing list