[KLUG Members] scanner / printer register problem
Brock Inglehart
brocki1 at sbcglobal.net
Fri Sep 1 17:45:47 EDT 2006
Lets see if I can answer your questions.
On Wed, 2006-08-30 at 16:52 -0700, Nikolas Reist wrote:
> I would need to know the printer type.
Epson C86 inkjet USB scanner. Its an old model but flys well with Linux
> Also I am not familiar with Iscan. Is that an epson app?
I got it through Stu Gillis. I can't remember where we dug it up.
> . You might try Kooka.
I tried Kooka first but it wouldn't work even though it was the default
load.
Brock
> I have had good dealings with that. The GIMP will also acquire images
> from your scanner and you can print to any layout you wish.
>
> ----- Original Message ----
> From: Brock Inglehart <brocki1 at sbcglobal.net>
> To: The main KLUG mailing list. <members at kalamazoolinux.org>
> Sent: Wednesday, August 30, 2006 5:25:10 PM
> Subject: Re: [KLUG Members] scanner / printer register problem
>
> No luck, I made sure the page size was set on letter when I installed
> the printer. I also just checked it again and it is set on letter.
> What else can I try. What specifics would you need to know?
> Brock
> On Mon, 2006-08-28 at 17:02 -0700, Nikolas Reist wrote:
> > You need to go to your SuSE menu and under Utilities --> Printing,
> > select Printing Manager (if you use KDE). It will bring up your KDE
> > cups user configuration. You enter Administrator Mode and then
> select
> > the default paper type by click on the Printer dropdown and choosing
> > Configure. If that doesn't work, you need to use YaST and define
> the
> > paper type in the queue settings for your printer. I will need to
> > know some more specifics to make a more informed guess.
> >
> > ----- Original Message ----
> > From: Brock Inglehart <brocki1 at sbcglobal.net>
> > To: members list <members at kalamazoolinux.org>
> > Sent: Monday, August 28, 2006 2:54:15 PM
> > Subject: [KLUG Members] scanner / printer register problem
> >
> > Using Suse 10.0, Epson Perfection 1200U scanner and the Iscan
> scanner
> > utility.
> > The problem: When I do a preview scan of a full page, all looks well
> > and
> > in register of the scan window. If I scan to file, all is in
> > register.
> > But if I scan to printer, the printer starts to print the document
> > from
> > the top but indexes the paper in the printer aproximately 1/3 down
> > before the printing actually starts thus turning a single page
> > document
> > in to a 2 page document.
> > The printer is set for "letter " size paper.
> > How do I get the two back in sync?
> >
> > _______________________________________________
> > Members mailing list
> > Members at kalamazoolinux.org
> >
> >
> >
> >
> > _______________________________________________
> > Members mailing list
> > Members at kalamazoolinux.org
> >
>
> _______________________________________________
> Members mailing list
> Members at kalamazoolinux.org
>
>
>
>
> _______________________________________________
> Members mailing list
> Members at kalamazoolinux.org
>
More information about the Members
mailing list