[KLUG Members] IBM netfinity 3500
Bruce Smith
members@kalamazoolinux.org
21 Dec 2002 14:03:55 -0500
> I just bought a used IBM Netfinity 3500 PII SCSI. I have no experience
> with SCSI. when I turn the unit on it goes to the second screen that says
> CA SCSI ID:0 IBM-PCCO DDRS-39130W !# Harddisk 0
> SCSI ID:3 HP HP 35470A Start unit
> request failed
> SCSI BIOS Installed Sucessfully
Those are normal messages. It means it found your hard drive, and the
tape drive okay. The "Start unit request failed" is also normal. I get
this all the time on my IBM Intellistations.
> the next screen says
> 1962 Boot sequence error
> and shows a pictorial of putting a disk in drive A
> This machine I believe has OS2 installed, with IBM DDRS-39130
> HARDDRIVE, cd, AND hp SURE STORETtAPE 2000, AND 96 M RAM.
> thanks for any help
I don't know about the Netfinity's, but the IBM Intellistations have a
"Startup" selection in the BIOS to tell it what order to look for boot
devices. Make sure you have "SCSI" and/or "Hard Drive" listed.
Otherwise, there may be something wrong with your hard drive so it can't
boot from it. (like it's empty or missing the boot program)
--------------------------------------------
Bruce Smith bruce@armintl.com
System Administrator / Network Administrator
Armstrong International, Inc.
Three Rivers, Michigan 49093 USA
http://www.armstrong-intl.com/
--------------------------------------------