[KLUG Members] IBM netfinity 3500
Adam Williams
members@kalamazoolinux.org
Sat, 21 Dec 2002 14:31:02 -0500 (EST)
>> I just bought a used IBM Netfinity 3500 PII SCSI. I have no experience
>> with SCSI. when I turn the unit on it goes to the second screen that says
>> CA SCSI ID:0 IBM-PCCO DDRS-39130W !# Harddisk 0
>> SCSI ID:3 HP HP 35470A Start unit
>> request failed
>> SCSI BIOS Installed Sucessfully
>Those are normal messages. It means it found your hard drive, and the
>tape drive okay. The "Start unit request failed" is also normal. I get
>this all the time on my IBM Intellistations.
Yep. Is the 3500 hot-swap equipped. If so you have two little lights on
each bay. If the one to the right (sorry, color blind) is flashing then
your disk is flumoxed.
>>the next screen says
>>1962 Boot sequence error
>>and shows a pictorial of putting a disk in drive A
>>This machine I believe has OS2 installed, with IBM DDRS-39130
>>HARDDRIVE, cd, AND hp SURE STORETtAPE 2000, AND 96 M RAM.
>>thanks for any help
>I don't know about the Netfinity's, but the IBM Intellistations have a
>"Startup" selection in the BIOS to tell it what order to look for boot
>devices. Make sure you have "SCSI" and/or "Hard Drive" listed.
>Otherwise, there may be something wrong with your hard drive so it can't
>boot from it. (like it's empty or missing the boot program)
I'd guess that they wiped the HD.