[KLUG Members] IPCOP

[paul]

Thanks Bruce, scp is slowly sinking in... but I've run into the muck 
again...
Once I got the module in to 2.2.20/ipv4 directory I found that it was 
not getting loaded.
I did the insmod by hand and discovered the module is for 2.2.20 and IPCOP
is running under 2.2.21rc1.  Where can I hope to find this module for 
this kernel?
Many thanks, and I'll keep looking...
Paul

Bruce Smith wrote:

>>ok, here is an update on my confusion... 'paul' is my machine inside the 
>>firewall - I use mozilla to access the firewall's Secure shell window. 
>> I tried the scp command below, and got a confusing message... a little 
>>more searching at the sourceforge email archive gave me a few more 
>>clues... I'm out of time tonight, I'll finish this task over the weekend.  
>>(the end result here is to get a VPN connection thru IPCOP)
>>
>
>Try copying it TO your IPCOP box from your machine inside the firewall.
>
>as root on machine "paul":
>
>  scp -P 222 /home/vanallp/ip_masq_ipsec.o ipcop:ip_masq_ipsec.o
>
>And MAKE SURE your "ipcop" box RESOLVES.  (that's probably your problem
>above unless you manually added "paul" to /etc/hosts on the IPCOP box).
>
>  ping ipcop
>
>If that doesn't work, then use the IP number instead of the name.
>
>--------------------------------------------
>Bruce Smith                bruce@armintl.com
>System Administrator / Network Administrator
>Armstrong International, Inc.
>Three Rivers, Michigan  49093  USA
>http://www.armstrong-intl.com/
>--------------------------------------------
>
>_______________________________________________
>Members mailing list
>Members@kalamazoolinux.org
>
>
>