[KLUG Members] partition check?

[Bill Katsma]

> > During boot up I get a time out on Partition check.
>
> Can you get the exact message from dmesg?
>

Here is portion of the output from dmesg

ide0: BM-DMA at 0x1020-0x1027, BIOS settings: hda:pio, hdb:pio
hda: IBM-DTCA-23240, ATA DISK drive
ide2: ports already in use, skipping probe
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: 6354432 sectors (3253 MB) w/468KiB Cache, CHS=788/128/63, UDMA(33)
ide-floppy driver 0.97
Partition check:
 hda:hda: timeout waiting for DMA
ide_dmaproc: chipset supported ide_dma_timeout func only: 14
hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hda: drive not ready for command
 hda1 hda2 hda3
hda: timeout waiting for DMA
ide_dmaproc: chipset supported ide_dma_timeout func only: 14
hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hda: drive not ready for command

This portion get repeated multible times

hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hda: drive not ready for command

> >I have had RH 7.2
> >installed on it for a couple months and I am assuming it has done this
ever
> >since the beging.  Although it is timing out everything seems to work
fine.
>
> Can you boot into single user mode and manually run fsck on your root
> partition/md/lvm?

I did this as you suggested and I get the sam resaults.

Thanks again