[KLUG Members] Charter and Linux
Bruce Smith
members@kalamazoolinux.org
23 Oct 2002 08:42:32 -0400
Redhat works fine with Charter (I have Charter at home).
You only need to tell Redhat to use DHCP.
You said you are doing this with an "older workstation".
Does that mean you are unplugging a different PC and
plugging your cable modem into the "older workstation"?
Whenever you switch the network cable from the cable modem
from one network card to a different NIC, you have to
power off the cable modem, wait a few minutes, and power
it back on before it will work. This is OS independent.
> Ok.. before you say Check the archives.. I searched on
> Charter, Cable, broadband as well as DHCP and other
> adn came up with zilch.. I don't know if the archive
> was down or the search feature..
>
> My question is I jus installed RH8 to a older
> workstation I have to setup a firewall/DHCP server..
> for some reason It is not pulling an Address on the
> incoming NIC .. I have re-assigned the NICs to make
> sure the one was not bad and can browse my internal
> network but have not been able to get an outide
> connection.. anyone else have this problem with Charter???
--------------------------------------------
Bruce Smith bruce@armintl.com
System Administrator / Network Administrator
Armstrong International, Inc.
Three Rivers, Michigan 49093 USA
http://www.armstrong-intl.com/
--------------------------------------------